Company Profile

One of the leading neckwear manufacturers and suppliers in China, Shengzhou Jinfa Necktie Co., Ltd is specialized in producing and customizing competitive and quality neckwear products either OEM-based or self-branded, including Jacquard or woven, yarn dyed or printed silk or polyester neckties, scarves, shawls, stoles and bow ties, etc. more>>

Apply to JoinMembers' Blogs

Leave a Message

Verifying Code:

Note: Messages maybe be displayed after being checked by the administrator. Please do not repeat the same message.

Resources & Links

Visits: 1678762

Make a Post - MoreBlog Posts > Something about necktie

Silk tie manufacturing processes

Font Size:big - mid - smallejinfatie   Release time 12-07-20 14:39     view:308   coomment:0   source:

A. Tie Design:
Yarn-dyed necktie: the design or pattern you want to come out to have a certain regularity, and then tie design dedicated software, according to the pattern design can be used for fabric looms on the software or spend edition.
Print tie: there is no specific requirement pattern, as long as you can out of it can be printed on the card, the printing must first do the film, which is commonly referred to as film, and then made the flower version.
Two. Do tie fabrics:
Yarn-dyed tie: is used to dye a good wire machine woven fabric looks strong stereoscopic.
Print tie: use molded white embryo fabric with pigment printed up, feel quite soft, color variety, relatively bright.
3. Cutting:
The fabric is first necessary to cut the shape of the tie, attention must be 45-degree angle cuts. Fabric determine the length of the tie.
Then, you must cut the lining of the tie, usually with polyester, silk or wool. The shape of the tie should be according to the lining, straight banding patterns are generally divided into the vial type bottle, a matter of personal prefer different.
Finally, also cut the tie wire (that is, negative tie the bulk of the cloth), usually some tie to cook the brand mark, but is now widely with the general rules, the fine point wire. There in order to reflect the grade of the tie to do with the same fabric with tie wire inside, so the material cost is a big difference.
4. Workers processing tie molding steps:
Connection fabric flat car, and then wire combined with the fabric, and then into the lining, ironing workers wrap the fabric lining, tailoring tie fabric and inside lining are sewn together with a needle (that is, tie the opposite the middle of a line), in large hot steam to tie iron out the wrinkles forming.
5 Finally the auxiliary processes:
Set on trademarks, or tie the climb (that is, the logo above a short period a tie flower of the same fabric).

Commentcomments (0)


username:  not register?   password:(guest)

validation code:  

  • Telephone Hotline